Hyundai Elantra (CN7): Engine Mechanical System / Engine And Transaxle Assembly
Special Service Tools Tool (Number and name) Illustration Use Valve spring compressor(09222-3K000)Valve spring compressor adapter(09222-3K100)Removal and installation of the intake / exhaust valve spring and retainer lockValve stem seal installer(09222-2B100)Installation of the valve stem sealOil pan remover(09215-3C000)Removal of oil panCrankshaft front oil seal installer(0K231-2C200)Installation of the crankshaft front oil sealCrankshaft rear oil seal installer(09231-2B200)Handle(09231-H1100)Installation of the crankshaft rear oil sealRing gear stopper(09231-3N100)(09231-2B100)Removal and installation of crankshaft damper pulley bolt
Repair procedures Removal and Installation1.Remove the engine cover (A).2.Installation is reverse order of removal
Other information:
Hyundai Elantra (CN7) 2021-2026 Service Manual: Condenser
Components and components location Components Location[General type]1. Condenser[N Line]1. Condenser Repair procedures Inspection1.Check the condenser fins for clogging and damage. If clogged, clean them with water, and blow them with compressed air.
Hyundai Elantra (CN7) 2021-2026 Service Manual: Intake Actuator
Description and operation DescriptionThe intake actuator is located at the blower unit. It regulates the intake door by a signal from the control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes. Components and components location Components Location1.
Categories
- Manuals Home
- Hyundai Elantra Owners Manual
- Hyundai Elantra Service Manual
- Brake System
- Recommended Lubricants and Capacities
- Maintenance
- New on site
- Most important about car
