Hyundai Elantra (CN7): Manual Transaxle System / Special service tools

Hyundai Elantra (CN7) 2021-2026 Service Manual / Manual Transaxle System / Special service tools

Special Service Tools
Tools
(Number and name)
Illustration
Use
Engine support fixture (Beam)
09200-3N000

Removal and installation of the transaxle.
Used with the supporter (09200-2S100).
Engine support fixture (Rear)
09200-L1100

Removal and installation of the transaxle.with the beam (SST No. : 09200-38001/3N000).
Engine support fixture (Front)
09200-L1200

Removal and installation of the transaxle.with the beam (SST No. : 09200-38001/3N000)
Engine support fixture (Adapter)
09200-4X000

Removal and installation of the transaxle.
Use this beam (SST No. : 09200-3N000)
Oil seal installer
09453-2F300

Used for installing differential oil seal

    Specifications Manual transaxle type FF 6th Manual Transaxle (M6CF3-1) Engine typeGasoline 1.6 T-GDIGear ratio1st3.

    Other information:

    Hyundai Elantra (CN7) 2021-2026 Service Manual: License Lamps

    Repair procedures Removal1.Disconnect the negative (-) battery terminal.2.Push the lock pin (B) and remove the license lamp (A).3.Disconnect the license lamp connector (A).4.Replace the bulb (A).Installation1.Connect the license lamp connector.2.Install the license lamp.

    Hyundai Elantra (CN7) 2021-2026 Service Manual: Description and operation

    DescriptionThe immobilizer system will disable the vehicle unless the proper ignition key is used, in addition to the currently available anti-theft systems such as car alarms, the immobilizer system aims to drastically reduce the rate of auto theft.1.

    Categories

     
    Copyright В© 2026 www.helantra7.com - 0.0262