Hyundai Elantra (CN7): Auto Lighting Control System / Specifications

Hyundai Elantra (CN7) 2021-2025 Service Manual / Body Electrical System / Auto Lighting Control System / Specifications

Specifications
Items
Specifications
Rated voltage
5V
Load
Max. 1mA (Relay load)
Illuminations (LUX)
100
0.76 ± 0.17V
150
1.3 ± 0.30V

    Component Location1. Auto light sensor2. Head lamps3. Lighting switch (Auto)4. Rear combination lamps5. Integrated body control unit (IBU)

    Circuit Diagram

    Other information:

    Hyundai Elantra (CN7) 2021-2025 Service Manual: Blower Resistor (Manual)

    Repair procedures Inspection1.Measure the resistance between the terminals.2.The measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor)Replacement1.Disconnect the negative (-) battery terminal.

    Hyundai Elantra (CN7) 2021-2025 Service Manual: Intake Actuator

    Description and operation DescriptionThe intake actuator is located at the blower unit. It regulates the intake door by a signal from the control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes. Components and components location Components Location1.

    Categories

     
    Copyright © 2025 www.helantra7.com - 0.0186