Hyundai Elantra (CN7): ISG (Idle Stop and Go) system / To Deactivate the ISG System

  • Press the ISG OFF button to deactivate the ISG system. Then, the ISG OFF button indicator illuminates.
  • Press the ISG OFF button again to reactivate the ISG system. Then, the ISG OFF button indicator turns OFF.

    Prerequisite for activation The ISG system operates in the following situations. The driver's seatbelt is fastened The driver's door and hood are closed The brake vacuum pressure is adequate The battery sensor is activated and the battery is sufficiently charged Outside temperature is not too low or too high The vehicle is driven over a constant speed and stops The climate control system satisfies the conditions The vehicle is sufficiently warmed up The incline is gradual The steering wheel is turned less than 180 degrees and then the vehicle stops Information If the ISG light (white) is turned on on the instrument cluster and does not meet the ISG system operating conditions, the ISG system is not activated.

    The ISG system may not operate: When there is a malfunction with the ISG sensors or the ISG system. The followings occur, when there is a malfunction with the ISG system: The auto stop indicator ( ) will illuminate in yellow on the instrument cluster.

    Other information:

    Hyundai Elantra (CN7) 2021-2026 Service Manual: Rear Combination Lamp

    Repair procedures RemovalOutside Combination Lamp1.Disconnect the negative (-) battery terminal.2.Remove the combination lamp cover (A).3.Disconnect the rear combination lamp connector (A).4.Loosen the mounting nuts and remove the rear conbination lamp (A).

    Hyundai Elantra (CN7) 2021-2026 Service Manual: Repair procedures

    Inspection1.Check for resistance between terminals in each switch position (LH).[LH : Audio + Hands free] Switch Resistance (±5%) SEEK Up430 ΩSEEK Down1.11 kΩMODE2.11 kΩMUTE3.11 kΩVolume (+)4.

    Categories

     
    Copyright © 2026 www.helantra7.com - 0.0207