Hyundai Elantra Owners and Service Manuals

Hyundai Elantra: Reverse Parking Distance Warning (PDW) / Function operation

Reverse Parking Distance Warning

  • Reverse Parking Distance Warning will operate when the gear is in R (Reverse).
  • Reverse Parking Distance Warning detects a person, animal or object in the rear when the vehicle’s rearward speed is below 6 mph (10 km/h).

  • The corresponding indicator will illuminate whenever each ultrasonic senor detects a person, animal or object in its sensing range. Also an audible warning will sound.
  • When more than two objects are detected at the same time, the closest one will be warned with an audible warning.
  • The shape of the indicator in the illustration may differ from the actual vehicle.

    System settings

    Warning Volume With the Engine Start/Stop button in the ON position, select ‘Driver Assistance → Warning Volume’ from the Settings menu to change the Warning Volume to ‘High’, ‘Medium’ or ‘Low’ for Reverse Parking Distance Warning...

    Function malfunction and precautions

    Function malfunction After starting the engine, a beep will sound when the gear is shifted to R (Reverse) to indicate the system is operating normally...

    Other information:

    Hyundai Elantra (CN7) 2021-2025 Owner's Manual: Check tire pressure


    You can check the tire pressure in the Assist mode on the cluster. Tire pressure is displayed after a few minutes of driving after initial engine start up. If tire pressure is not displayed when the vehicle is stopped, “Drive to display” message will appear...

    Hyundai Elantra (CN7) 2021-2025 Service Manual: Master Cylinder


    Components and components location Components1. Reservoir cap2. Reservoir3. Brake fluid lever sensor4. Master cylinder5. Brake booster6. Push road Repair procedures Removal[LHD]1.Turn ignition switch OFF and disconnect the negative (-) battery cable...

    Categories

    Manual climate control system

    To defog inside windshield

    [A] : Type A, [B] : Type B

    1. Select any fan speed except “0” position.

    2. Select the desired temperature.

    3. Select the or position.

    read more

    Copyright © 2025 www.helantra7.com