Hyundai Elantra: Navigation-Based Smart Cruise Control (NSCC) / Function settings
Setting
.png)
With the engine on, select ‘Driver
Assistance → Driving Assist → Highway
Auto Speed Change’ from the Settings
menu to turn on Navigation-based Smart
Cruise Control and deselect to turn off
the system.
Information
When there is a problem with Navigationbased
Smart Cruise Control, the function
cannot be set from the Settings menu.
Navigation-based Smart Cruise Control
can help automatically adjust vehicle
speed when driving on highways (or
motorways) by using road information
from the navigation system while Smart
Cruise Control is operating...
Operating conditions
Navigation-based Smart Cruise Control
is ready to operate if all of the following
conditions are satisfied:
Smart Cruise Control is operating
Driving on main roads of highways (or
motorways)
Information
For more details on how to operate Smart
Cruise Control, refer to “Smart Cruise
Control (SCC)” section in chapter 7...
Other information:
Repair procedures
Removal1.Turn the ignition switch OFF and disconnect the negative (-) battery cable.2.Disconnect the accelerator position sensor connector (A).3.Remove the installation nuts, and then remove the accelerator pedal module (A). Tightening Torque : 16...
Driver’s and passenger’s front air
bags
Your vehicle is equipped with an
Advanced Supplemental Restraint
System (SRS) and lap/shoulder belts at
both the driver and passenger seating
positions.
The SRS consists of air bags which are
located in the center of the steering
wheel, in the driver’s side lower crash
pad below the steering wheel column
and the passenger’s side front panel ..