Hyundai Elantra: General Information / General Tightening Torque Table

General Information

..

General information

Tightening Torque Table of Standard Parts BOLT (Nominal diameter) NUT (Nominal diameter) BOLT/NUT Normal screw Torque Nm (kg...

Other information:

Hyundai Elantra (CN7) 2021-2025 Owner's Manual: ESC operation

ESC ON condition When the ignition switch is in the ON position, the ESC and the ESC OFF indicator lights illuminate for approximately three seconds. After both lights go off, the ESC is enabled. When operating When the ESC is in operation, the ESC indicator light blinks: When you apply your brakes under conditions which may lock the wheels, you may hear sounds from the brakes, or fe..

Hyundai Elantra (CN7) 2021-2025 Service Manual: Water Inlet Fitting

Repair procedures RemovalWater Inlet Fitting1.Remove the engine room under cover.(Refer to Engine and Transaxle Assembly - "Engine Room Under Cover")2.Drain the coolant. (Refer to Cooling System - "Coolant")3.Disconnect the radiator lower hose (A).4.Disconnect the oil cooler hose (A).5.Remove the water inlet fitting (A). Tightening torque : 18.6 - 23.5 N.m (1.9 - 2.4 kgf.m,..