Hyundai Elantra (CN7): General Information
- General Tightening Torque Table. General information
- Important Safety Notice. General information
- Identification Numbers. General information
- Warning and Caution Labels. General information
- Lift and Support Points. General information
- Towing. General information
- Basic Service Symbols. General information
- General Service Information. General information
This service manual for the 2021 Hyundai Elantra (CN7) is your go-to resource for everything you need to maintain, service, and repair your Elantra with precision.
General information Tightening Torque Table of Standard Parts BOLT (Nominal diameter) NUT (Nominal diameter) BOLT/NUT Normal screw Torque Nm (kg.
Other information:
Hyundai Elantra (CN7) 2021-2026 Service Manual: License Lamps
Repair procedures Removal1.Disconnect the negative (-) battery terminal.2.Push the lock pin (B) and remove the license lamp (A).3.Disconnect the license lamp connector (A).4.Replace the bulb (A).Installation1.Connect the license lamp connector.2.Install the license lamp.
Hyundai Elantra (CN7) 2021-2026 Service Manual: Intake Actuator
Description and operation DescriptionThe intake actuator is located at the blower unit. It regulates the intake door by a signal from the control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes. Components and components location Components Location1.
Categories
- Manuals Home
- Hyundai Elantra Owners Manual
- Hyundai Elantra Service Manual
- Drive Mode
- Maintenance
- Auto Hold. Warning messages
- New on site
- Most important about car
