Hyundai Elantra: Light Bulbs / Interior Light Bulb Replacement
.png)
.png)
1. Using a flat-blade screwdriver, gently pry the lens from the interior lamp
housing.
2. Remove the bulb by pulling it straight out.
WARNING
Prior to working on the Interior Lights, ensure that the “OFF” button is
depressed to
avoid burning your fingers or receiving an electric shock.
3. Install a new bulb in the socket.
4. Align the lens tabs with the interior lamp housing notches and snap the
lens into
place.
NOTICE
Use care not to dirty or damage lens, lens tab, and plastic housings.
1. Using a flat-blade screwdriver gently
pry the lens cover from the lamp
housing.
2. Remove the bulb by pulling it straight
out.
3. Install a new bulb...
Exterior general caution
It is very important to follow the label
directions when using any chemical
cleaner or polish. Read all warning and
caution statements that appear on the
label...
Other information:
Instrument panel fuse panel
Inside the fuse/relay box cover, you can
find the fuse/relay label describing fuse/
relay names and ratings.
Information
Not all fuse panel descriptions in this
manual may be applicable to your vehicle;
the information is accurate at the time of
printing...
Operation and Leakage Check
Component
Procedure
Brake Booster (A)Apply the brake and check its operation during the test run. If it does not work properly, replace the brake booster. If the brake fluid is found inside the booster when disassembling, replace the booster and master cylinder...