Hyundai Elantra Owners and Service Manuals

Hyundai Elantra: Body Electrical System / Power Door Mirrors

Power Door Lock Switch

Repair procedures InspectionPower Door Lock Switch Inspection1.Check for continuity between the terminals. If there is an abnormality, replace the switch...

Components and components location

Component Location1. Power door mirror2. Power door mirror switch3. Power folding mirror switch..

Other information:

Hyundai Elantra (CN7) 2021-2024 Service Manual: Rear Combination Lamp


Repair procedures RemovalOutside Combination Lamp1.Disconnect the negative (-) battery terminal.2.Remove the combination lamp cover (A).3.Disconnect the rear combination lamp connector (A).4.Loosen the mounting nuts and remove the rear conbination lamp (A).5.Remove the socket (A) and replace the bulb (B).Inside Combination Lamp1.Disconnect the negative (-) battery terminal.2.Remove the trunk li..

Hyundai Elantra (CN7) 2021-2024 Owner's Manual: Vehicle Stability Management (VSM)


The Vehicle Stability Management (VSM) is a function of the Electronic Stability Control (ESC) system. It helps ensure the vehicle stays stable when accelerating or braking suddenly on wet, slippery and rough roads where traction over the four tires can suddenly become uneven. WARNING Take the following precautions when using the Vehicle Stability Management (VSM): ALWAYS check the speed..

Categories

Rear center seat belt

When using the rear center seat belt, the buckle with the “CENTER” mark must be used.

WARNING

Make sure that the seatback is locked in place when using the rear center seat belt.

If not, the seatback may move when there is a sudden stop or collision, which could result in serious injury.

read more

Copyright © 2024 www.helantra7.com