
If your vehicle is equipped with a sunroof, you can slide or tilt your sunroof with the sunroof control switch located on the overhead console.
The sunroof can only be opened, closed, or tilted when the ignition switch is in the ON position.
The sunroof can be operated for approximately 3 minutes after the ignition switch is turned to the ACC or OFF position.
However, if the front door is opened, the sunroof cannot be operated even within the 3 minutes period.
Information
WARNING
NOTICE
The driver can disable the power window switches on the rear passenger doors by pressing the power window lock switch. When the power window lock switch is pressed: The rear passenger control will not be able to operate the rear passenger power window Note that the front passenger control is still able to operate the front passenger window, and that the driver master control can still operate all the power windows.
To open or close the sunroof(manual slide feature), push the sunroof control lever backward or forward to the first detent position. To open the sunroof (auto slide feature), push the sunroof control lever backward to the second detent position.
Repair procedures RemovalMood lamp unit1.Disconnect the negative (-) battery terminal.2.Remove the main crash pad assembly.(Refer to Body - "Main Crash Pad Assembly")3.Loosen the mounting screws and remove the main crash pad air duct (A).4.Loosen the mounting screws and remove the mood lamp unit (A).
Description and operation DescriptionThe evaporator temperature sensor will detect the evaporator core temperature and interrupt compressor relay power in order to prevent evaporator from freezing by excessive cooling. The evaporator temperature sensor has the Negative Temperature Coefficient (NTC).