Hyundai Elantra: Warning and Indicator Lights / Electronic Stability Control
(ESC) Indicator Light

This indicator light illuminates:
• When you place the ignition switch to
the ON position.
-- The Electronic Stability Control
indicator light illuminates for about
3 seconds and then goes off.
• Whenever there is a malfunction with
the ESC system.
If this occurs, have the vehicle
inspected by an authorized HYUNDAI
dealer.
This indicator light blinks:
While the ESC is operating.
This warning light illuminates:
• When you place the ignition in the ON
position.
-- It illuminates for approximately 3
seconds and then goes off...
This indicator light illuminates:
• When you place the ignition switch to
the ON position.
-- It illuminates for approximately 3
seconds and then goes off...
Other information:
Function malfunction
When Rear Cross-Traffic Safety system
is not working properly, the ‘Check
Rear Cross-Traffic Safety system’
warning message will appear on the
cluster, and the system will turn off
automatically or the system will be
limited...
To set speed
1. Accelerate to the desired speed,
which must be more than 20 mph (30
km/h).
2. Press the Driving Assist button at
the desired speed. The set speed
and Cruise () indicator will
illuminate on the cluster.
3. Release the accelerator pedal...