Hyundai Elantra (CN7): Engine Mechanical System / Intake And Exhaust System
Repair procedures Removal and Installation1.Disconnect the battery negative terminal.2.Disconnect the oil pressure control solenoid valve connector (A).
Components and components location Components1. Air cleaner cover2. Air cleaner element3. Air cleaner body & air duct5. Air intake hose Repair procedures Removal and InstallationAir Cleaner Assembly.
Other information:
Hyundai Elantra (CN7) 2021-2026 Service Manual: Auto Defogging Sensor
Description DescriptionThe auto defogging sensor is installed on the front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module receives signal from the sensor and restrains moisture and eliminate defog by controlling the intake actuator, A/C, auto defogging actuat
Hyundai Elantra (CN7) 2021-2026 Service Manual: Description and operation
Description and OperationBlcok Diagram • This system monitors the driving situations through the radar and the camera. Thus, for a situation out of the sensing range, the system may not normally operate. The System may be limited when : • The radar sensor or camer
Categories
- Manuals Home
- Hyundai Elantra Owners Manual
- Hyundai Elantra Service Manual
- Integrated Thermal Management Module (ITM)
- Front Radar Unit
- Rear Seats
- New on site
- Most important about car
