Hyundai Elantra (CN7): Body Electrical System / Integrated Body Control Unit (IBU)
- Description and operation
- Components and components location
- Specifications
- Schematic diagrams
- Repair procedures
Inspection • Wrap the protective tape on the tool to disassemble with the screwdriver or remover. • Use caution in keeping and handling during disassembling/assembling because it is easily contaminated with lubricant and oil.
DescriptionBody Control Module Controls The Followings– Wiper & Washer Control– Defroster Control– Driving Control– Tailgate Control– Window Control– Interior Control– Exterior Control– Panic alarm Control– MTS– Flasher output Control– Door lock/unlock Control– Burglar alarm Control– Remote start Control– UMS(User Mode Setting) Control– Gateway/ DiagnosisIntegrated Body Control Unit (IBU) Integrated body control unit has integrated several functions including body control module (IBU), smart key unit (SMK), and tire pressure monitoring system (TPMS).
Other information:
Hyundai Elantra (CN7) 2021-2026 Service Manual: Ignition Switch Assembly. Repair procedures
Repair procedures Replacement1.Disconnect the negative (-) battery terminal.2.Remove the crash pad lower panel.(Refer to Body - "Crash Pad")3.Remove the steering column upper & Lower shroud.4.Remove the ignition switch and disconnecting the Key Warning / immobilizer connector.
Hyundai Elantra (CN7) 2021-2026 Service Manual: General safety information and caution
Instructions (R-134a)When Handling Refrigerant1.R-134a liquid refrigerant is highly volatile. A drop on the skin of your hand could result in localized frostbite. When handling the refrigerant, be sure to wear gloves. 2.It is standard practice to wear goggles or glasses to protect your eyes, and gloves to protect your hands.
Categories
- Manuals Home
- Hyundai Elantra Owners Manual
- Hyundai Elantra Service Manual
- Drive Mode
- Engine Mechanical System
- Integrated Thermal Management Module (ITM)
- New on site
- Most important about car
