Hyundai Elantra Owners and Service Manuals

Hyundai Elantra: Sun Roof / Schematic diagrams

Circuit Diagram

    Components and components location

    C..

    Sunroof Switch

    Repair procedures Inspection1.Disconnect the negative (-) battery terminal.2.Using a remover and remove the overhead console (A).3.Check for continuity between the terminals...

    Other information:

    Hyundai Elantra (CN7) 2021-2024 Service Manual: Troubleshooting


    Failure Diagnosis1.In principle, ESP and TCS controls are prohibited in case of ABS failure.2.When ESP or TCS fails, only the failed system control is prohibited.3.However, when the solenoid valve relay should be turned off in case of ESP failure, refer to the ABS fail-safe...

    Hyundai Elantra (CN7) 2021-2024 Service Manual: Receiver-Drier


    Repair procedures Replacement1.Remove the condenser.2.Remove the cap (A) on the bottom of the condenser with a L wrench. Tightening torque : 9.81 - 14.71 N.m (1.0 - 1.5 kgf.m, 7.2 - 10.8 lb-ft) 3.Remove the receiver-drier (A) from condenser using a long nose plier...

    Categories

    Function malfunction and limitations

    Function malfunction

    When High Beam Assist is not working properly, the ‘Check High Beam Assist (HBA) system’ or ‘Check HBA (High Beam Assist) system’ warning message will appear and warning light will illuminate on the cluster. Take your vehicle to an authorized HYUNDAI dealer and have the function checked.

    read more

    Copyright © 2024 www.helantra7.com