Hyundai Elantra: Multifunction Switch / Specifications

Hyundai Elantra (CN7) 2021-2025 Service Manual / Body Electrical System / Multifunction Switch / Specifications

Specifications

Items		Specifications
Rated voltage		DC 12V
Operating temperature range		-40 to +176°F (-40°C to +80°C)
Quantity of standard load	Washer	Related current : 7A Blucking current : 15A Inrush current : 20A

Components and components location

C..

Repair procedures

Removal1.Disconnect the negative (-) battery terminal.2.Remove the steering wheel.(Refer to Steering System - "Steering Wheel")3.Remove the steering column upper and lower shrouds after loosening the screws...

Other information:

Hyundai Elantra (CN7) 2021-2025 Service Manual: Components and components location

Components Location1. Remote control switch (LH : Audio swtich)2. Remote control switch (RH : Cruse)3. Front rader unit..

Hyundai Elantra (CN7) 2021-2025 Service Manual: Front Wheel Speed Sensor

Components and components location Components1. Front wheel speed sensor2. Front wheel speed sensor connector Repair procedures Removal1.Turn ignition switch OFF and disconnect the negative (-) battery cable.2.Loosen the wheel nuts slightly.Raise the vehicle, and make sure it is securely supported.3.Remove the rear wheel and tire (A) from the rear hub. • ..

Function malfunction and limitations

Function malfunction

When High Beam Assist is not working properly, the ‘Check High Beam Assist (HBA) system’ or ‘Check HBA (High Beam Assist) system’ warning message will appear and warning light will illuminate on the cluster. Take your vehicle to an authorized HYUNDAI dealer and have the function checked.