Hyundai Elantra (CN7): Heating, Ventilation and Air Conditioning / Air Conditioning System
- General safety information and caution
- Description and operation
- Components and components location
- Repair procedures
- Compressor oil
- Refrigerant Line
- Compressor
- Condenser
- Receiver-Drier
- A/C Pressure Transducer
- Evaporator Temperature Sensor
- In-car Sensor
- Photo Sensor
- Ambient Temperature Sensor
- Auto Defogging Sensor
- PM Sensor
Special Service Tools Tool (Number and name) Illustration Use 09977-3R000Disc & hub assembly bolt removerRemoval and installation of disc & hub assembly.
Instructions (R-134a)When Handling Refrigerant1.R-134a liquid refrigerant is highly volatile. A drop on the skin of your hand could result in localized frostbite.
Other information:
Hyundai Elantra (CN7) 2021-2026 Service Manual: Temperature Control Actuator
Description and operation DescriptionThe temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch.
Hyundai Elantra (CN7) 2021-2026 Service Manual: Blower Motor
Repair procedures Inspection1.Connect the battery voltage and check the blower motor rotation.Replacement1.Disconnect the negative (-) battery terminal.2.Disconnect the blower motor connector (A) and then remove the blower motor (B) after loosening the screws.
Categories
- Manuals Home
- Hyundai Elantra Owners Manual
- Hyundai Elantra Service Manual
- Recommended Lubricants and Capacities
- Repair procedures
- Suspension System
- New on site
- Most important about car
