
This indicator light illuminates:
• When you place the ignition switch to the ON position.
-- It illuminates for approximately 3 seconds and then goes off.
• When you deactivate the ESC system by pressing the ESC OFF button.
Immobilizer Indicator Light
This indicator light illuminates:
• When the vehicle detects the immobilizer in the key with the ignition switch in the ON position.
-- At this time, you can start the engine.
-- The indicator light goes off after
starting the engine.
This indicator light blinks:
• When there is a malfunction with the immobilizer system.
If this occurs, have the vehicle inspected by an authorized HYUNDAI dealer.
This indicator light illuminates: • When you place the ignition switch to the ON position. -- The Electronic Stability Control indicator light illuminates for about 3 seconds and then goes off.
This indicator light illuminates for up to 30 seconds: When the vehicle detects the smart key in the vehicle with the Engine Start/Stop button in the ACC or ON position.
Components and components location Components Location[General type]1. Condenser[N Line]1. Condenser Repair procedures Inspection1.Check the condenser fins for clogging and damage. If clogged, clean them with water, and blow them with compressed air.
Schematic diagrams Circuit DiagramTRIP / SCC / LFA Repair procedures Inspection1.Check for resistance between terminals in each switch position (LH).[LH : Audio + Hands free] Switch Resistance (±5%) SEEK Up430 ΩSEEK Down1.