Hyundai Elantra (CN7): Engine Mechanical System / Lubrication System
- Components and components location
- Flow diagram
- Engine Oil
- Oil Pan
- Oil Filter & Oil Cooler
- Oil Pump
- Oil Pressure Control Solenoid Valve
Components and components location Components1. Water pump pulley2. Water pump 3. Water pump gasket Repair procedures Removal1.Remove the engine room under cover.
Components1. Variable oil pump2. Variable oil pump sproket3. Oil Pressure & temperature sensor4. Oil filter5. Filter cap O-ring6. Filter cap7. Safety pin8.
Other information:
Hyundai Elantra (CN7) 2021-2026 Service Manual: Mood Lamp
Repair procedures RemovalMood lamp unit1.Disconnect the negative (-) battery terminal.2.Remove the main crash pad assembly.(Refer to Body - "Main Crash Pad Assembly")3.Loosen the mounting screws and remove the main crash pad air duct (A).4.Loosen the mounting screws and remove the mood lamp unit (A).
Hyundai Elantra (CN7) 2021-2026 Service Manual: Mode Control Actuator
Description and operation DescriptionThe mode control actuator is located at the heater unit.It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C control unit. Pressing the mode select switch makes the mode control actuator shift in order of Vent → Bi-Level → Floor → Mix.
Categories
- Manuals Home
- Hyundai Elantra Owners Manual
- Hyundai Elantra Service Manual
- Instrument Panel Overview
- Body Electrical System
- Auto Hold. Warning messages
- New on site
- Most important about car
