Hyundai Elantra: Restraint / Special service tools

Hyundai Elantra (CN7) 2021-2025 Service Manual / Restraint / Special service tools

Special Service Tools

Tool (Number and Name)	Illustration	Use
Deployment tool 0957A-34100A		Airbag deployment tool. Use with (0957A-AL140)
Dummy 0957A-38200		Simulator to check the resistanceof each wiring harness. Use with (0957A-AL170)
Airbag deployment & dummy adapter kit 0957A-AL100		Use with airbag deployment and airbag inspection
Deployment adapter 0957A-AL140		Use with deployment tool. (0957A-34100A) (DAB, PAB, BPT, CAB)
Dummy adapter 0957A-AL170		Use with dummy (0957A-38200) (DAB, PAB, BPT, CAB)

DAB : Driver Airbag

PAB : Passenger Airbag

SAB : Side Airbag

CAB : Curtain Airbag

BPT : Seat Belt Pretensioner

Specifications

Tightening Torques Item N.m kgf.m lb-ft Passenger Air Bag 3...

Repair procedures

Component Replacement after Deployment • Before doing any SRS repairs, use the diagnostic tool to check for DTCs...

Other information:

Hyundai Elantra (CN7) 2021-2025 Service Manual: General information

Basic Service SymbolsThere are five primary symbols used to complement illustrations. These symbols indicated the materials to be applied to parts during service. Symbol Meaning Do not reuse the part...

Hyundai Elantra (CN7) 2021-2025 Service Manual: Blower Resistor (Manual)

Repair procedures Inspection1.Measure the resistance between the terminals.2.The measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor)Replacement1.Disconnect the negative (-) battery terminal...

Rear center seat belt

When using the rear center seat belt, the buckle with the “CENTER” mark must be used.

WARNING

Make sure that the seatback is locked in place when using the rear center seat belt.

If not, the seatback may move when there is a sudden stop or collision, which could result in serious injury.