Hyundai Elantra (CN7): Brake System / ABS(Anti-Lock Brake System)
- Description and operation
- Components and components location
- Troubleshooting
- Schematic diagrams
- ESC (Electronic Stability Control) Module
- Front Wheel Speed Sensor
- Rear Wheel Speed Sensor
Description and operation DescriptionIntroduction of Quick Brake Warning System (ESS)In case of quick brake by driver, the brake lamp or turn signal is blinked to warn against the vehicle at rear.
DescriptionThis specification applies to HCU(Hydraulic Control Unit) and ECU(Electronic Control Unit) of the HECU.(Hydraulic and Electronic Control Unit)This specification is for the wiring design and installation of ABS/ESP ECU.
Other information:
Hyundai Elantra (CN7) 2021-2026 Service Manual: A/C Pressure Transducer
Description and operation DescriptionThe A/C Pressure Transducer (APT) converts the pressure value of high pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the cooling fan by operating it high speed or low speed.
Hyundai Elantra (CN7) 2021-2026 Service Manual: Intake Actuator
Description and operation DescriptionThe intake actuator is located at the blower unit. It regulates the intake door by a signal from the control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes. Components and components location Components Location1.
Categories
- Manuals Home
- Hyundai Elantra Owners Manual
- Hyundai Elantra Service Manual
- Driver assistance system
- Front Radar Unit
- General Tightening Torque Table. General information
- New on site
- Most important about car
