Hyundai Elantra (CN7): Suspension System / Front Suspension System
Special Service Tools Tool (Number and Name) IIIustration Use 09546-3X100Shock absorber lock nut removal toolUsed for remove the shock absorber lock nut09568-1S100Ball joint removerSaperate the ball joint from the front alxe09551-AL100Rear torsion beam axle bush removal / installation toolRear torsion beam axle bush removal and installation tool
Components [A type]1. Front sub frame2. Front axle3. Front stabilizer bar4. Steering gearbox5. Front lower arm6. Front stabilizer bar link[B type]1. Sub frame2.
Other information:
Hyundai Elantra (CN7) 2021-2026 Service Manual: Auto Defogging Sensor
Description DescriptionThe auto defogging sensor is installed on the front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module receives signal from the sensor and restrains moisture and eliminate defog by controlling the intake actuator, A/C, auto defogging actuat
Hyundai Elantra (CN7) 2021-2026 Service Manual: Evaporator Core
Repair procedures Replacement1.Disconnect the negative (-) battery terminal. 2.Remove the heater and blower assembly.(Refer to Heater - "Heater Unit") 3.Remove the heater core cover (A) after loosening the mounting screws.4.Pull out the evaporator core (A) from the heater unit.
Categories
- Manuals Home
- Hyundai Elantra Owners Manual
- Hyundai Elantra Service Manual
- Integrated Thermal Management Module (ITM)
- Clutch System
- Instrument Cluster
- New on site
- Most important about car
