Hyundai Elantra (CN7): Engine Mechanical System / Lubrication System
- Components and components location
- Flow diagram
- Engine Oil
- Oil Pan
- Oil Filter & Oil Cooler
- Oil Pump
- Oil Pressure Control Solenoid Valve
Components and components location Components1. Water pump pulley2. Water pump 3. Water pump gasket Repair procedures Removal1.Remove the engine room under cover.
Components1. Variable oil pump2. Variable oil pump sproket3. Oil Pressure & temperature sensor4. Oil filter5. Filter cap O-ring6. Filter cap7. Safety pin8.
Other information:
Hyundai Elantra (CN7) 2021-2026 Service Manual: A/C Pressure Transducer
Description and operation DescriptionThe A/C Pressure Transducer (APT) converts the pressure value of high pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the cooling fan by operating it high speed or low speed.
Hyundai Elantra (CN7) 2021-2026 Service Manual: Intake Actuator
Description and operation DescriptionThe intake actuator is located at the blower unit. It regulates the intake door by a signal from the control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes. Components and components location Components Location1.
Categories
- Manuals Home
- Hyundai Elantra Owners Manual
- Hyundai Elantra Service Manual
- Driver assistance system
- Auto Hold. Warning messages
- Integrated Thermal Management Module (ITM)
- New on site
- Most important about car
