Hyundai Elantra (CN7): Body Electrical System / IMS(Integrated Memory System)
- Description and operation
- Components and components location
- Specifications
- Schematic diagrams
- Memory power seat unit
- Memory power seat switch
Removal1.Disconnect the negative (-) battery terminal.2.Remove the glove box housing cover.(Refer to Body - "Glove Box Housing Cover")3.Remove the IBU unit (A) after loosening mounting nuts.
DescriptionThe changed position of the seat by memorizing into the power seat unit with IMS switch controlling the optimal seat position set by the driver can be restored with the IMS switch.
Other information:
Hyundai Elantra (CN7) 2021-2026 Service Manual: License Lamps
Repair procedures Removal1.Disconnect the negative (-) battery terminal.2.Push the lock pin (B) and remove the license lamp (A).3.Disconnect the license lamp connector (A).4.Replace the bulb (A).Installation1.Connect the license lamp connector.2.Install the license lamp.
Hyundai Elantra (CN7) 2021-2026 Service Manual: Mode Control Actuator
Description and operation DescriptionThe mode control actuator is located at the heater unit.It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C control unit. Pressing the mode select switch makes the mode control actuator shift in order of Vent → Bi-Level → Floor → Mix.
Categories
- Manuals Home
- Hyundai Elantra Owners Manual
- Hyundai Elantra Service Manual
- Troubleshooting
- General Tightening Torque Table. General information
- Engine Control / Fuel System
- New on site
- Most important about car
