Hyundai Elantra Owners and Service Manuals

Hyundai Elantra: Body Electrical System / Smart Key System

Emergency Call (eCall) Antenna

Schematic diagrams Components Repair procedures RemovalRoof Antenna1.Disconnect the negative (-) battery terminal.2.Remove the roof trim.(Refer to Body - "Roof Trim Assembly")3...

Description and operation

DescriptionThe SMART KEY system is a system that allows the user to access and operate a vehicle in a very convenient way. To access the vehicle, no traditional key or remote control unit is needed...

Other information:

Hyundai Elantra (CN7) 2021-2025 Owner's Manual: Corrosion protection


Protecting your vehicle from corrosion By using the most advanced design and construction practices to combat corrosion, HYUNDAI produces vehicles of the highest quality. However, this is only part of the job. To achieve the longterm corrosion resistance your vehicle can deliver, the owner’s cooperation and assistance is also required...

Hyundai Elantra (CN7) 2021-2025 Owner's Manual: ESC operation


ESC ON condition When the ignition switch is in the ON position, the ESC and the ESC OFF indicator lights illuminate for approximately three seconds. After both lights go off, the ESC is enabled. When operating When the ESC is in operation, the ESC indicator light blinks: When you apply your brakes under conditions which may lock the wheels, you may hear sounds from the brakes, or fe..

Categories

Function malfunction and limitations

Function malfunction

When High Beam Assist is not working properly, the ‘Check High Beam Assist (HBA) system’ or ‘Check HBA (High Beam Assist) system’ warning message will appear and warning light will illuminate on the cluster. Take your vehicle to an authorized HYUNDAI dealer and have the function checked.

read more

Copyright © 2025 www.helantra7.com