Hyundai Elantra (CN7): Steering System / Steering Wheel (Heated Steering Wheel)
Service Adjustment Procedure Steering Wheel Play Inspection1.Turn the steering wheel so that the front wheels can face straight ahead.2.Measure the distance the steering wheel can be turned without moving the front wheels.
Components[G 1.6 MPI / LPI]1. Drive air bag module (DAB)2. Wiring3. Steering wheel4. Damper5. Remote control switch6. Switch bezel7. Lower cover[G 1.6 T-GDI]1.
Other information:
Hyundai Elantra (CN7) 2021-2026 Service Manual: Mood Lamp
Repair procedures RemovalMood lamp unit1.Disconnect the negative (-) battery terminal.2.Remove the main crash pad assembly.(Refer to Body - "Main Crash Pad Assembly")3.Loosen the mounting screws and remove the main crash pad air duct (A).4.Loosen the mounting screws and remove the mood lamp unit (A).
Hyundai Elantra (CN7) 2021-2026 Service Manual: Mode Control Actuator
Description and operation DescriptionThe mode control actuator is located at the heater unit.It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C control unit. Pressing the mode select switch makes the mode control actuator shift in order of Vent → Bi-Level → Floor → Mix.
Categories
- Manuals Home
- Hyundai Elantra Owners Manual
- Hyundai Elantra Service Manual
- Integrated Thermal Management Module (ITM)
- Drive Mode
- Vehicle Information
- New on site
- Most important about car
