Hyundai Elantra (CN7): Brake System / ESC (Electronic Stability Control) System
- Description and operation
- Components and components location
- Troubleshooting
- Schematic diagrams
- ESC (Electronic Stability Control) Module
- ESC OFF Switch
- Front Wheel Speed Sensor
- Rear Wheel Speed Sensor
- Emergency Signal System
Description and operation DescriptionThe electronic parking brake (EPB) is different from existing parking systems which operated with the brake pedal or the lever type.
Description of ESPESP recognizes critical driving conditions, such as panic reactions in dangerous situations, and stabilizes the vehicle by wheel-individual braking and engine control intervention.
Other information:
Hyundai Elantra (CN7) 2021-2026 Service Manual: High Mounted Stop Lamp
Repair procedures Removal1.Disconnect the negative (-) battery terminal.2.Remove the rear package tray trim.(Refer to Body - "Rear Package Tray Trim")3.Loosen the mounting screws and remove the high mounted stop lamp (A).Installation1.Install the high mounted stop lamp.
Hyundai Elantra (CN7) 2021-2026 Service Manual: Ignition Switch Assembly. Repair procedures
Repair procedures Replacement1.Disconnect the negative (-) battery terminal.2.Remove the crash pad lower panel.(Refer to Body - "Crash Pad")3.Remove the steering column upper & Lower shroud.4.Remove the ignition switch and disconnecting the Key Warning / immobilizer connector.
Categories
- Manuals Home
- Hyundai Elantra Owners Manual
- Hyundai Elantra Service Manual
- Brake System
- Driver assistance system
- Clutch System
- New on site
- Most important about car
