Hyundai Elantra (CN7): DCT(Dual Clutch Transmission) System
- Specifications
- Special service tools
- Troubleshooting
- Dual Clutch Transmission Assembly
- Dual Clutch Transmission Control System
- Description and operation
- DCT Control Module (TCM)
- Clutch Actuator & TCM Assembly
- Gear Actuator Assembly
- Input Speed Sensor
- Inhibitor Switch
- Shift Lever
- Shift Cable
- Dual Clutch System
Description and operation DescriptionComponent location Operation principle : Control shaft assembly is operated by shifting the shift lever.
SpecificationsDual clutch transmission Item Specification Transmission modelD7UF1-2 (7DCT)Engine modelGamma II 1.
Other information:
Hyundai Elantra (CN7) 2021-2026 Service Manual: Receiver-Drier
Repair procedures Replacement1.Remove the condenser.2.Remove the cap (A) on the bottom of the condenser with a L wrench. Tightening torque : 9.81 - 14.71 N.m (1.0 - 1.5 kgf.m, 7.2 - 10.8 lb-ft) 3.Remove the receiver-drier (A) from condenser using a long nose plier.
Hyundai Elantra (CN7) 2021-2026 Service Manual: Intake Actuator
Description and operation DescriptionThe intake actuator is located at the blower unit. It regulates the intake door by a signal from the control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes. Components and components location Components Location1.
Categories
- Manuals Home
- Hyundai Elantra Owners Manual
- Hyundai Elantra Service Manual
- Front Radar Unit
- Repair procedures
- Engine Control / Fuel System
- New on site
- Most important about car
