Hyundai Elantra (CN7): Body (Interior and Exterior) / Crash Pad
- Components and components location
- Cluster Fascia Side Panel
- Cluster Fascia Panel
- Crash Pad Garnish
- Crash Pad Lower Panel
- Glove Box
- Glove Box Housing Cover
- Steering Column Shroud Panel
- Crash Pad Air Vent
- Crash Pad Side Cover
- Crash Pad Center Panel
- Main Crash Pad Assembly
- Cowl Cross Bar Assembly
Components and components location Component Location [This illustration shows the LHD type. RHD type is symmetrical.]1. Console armrest Repair procedures Replacement • When removing with a flat - tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
Components[This illustration shows the LHD type. RHD type is symmetrical.]1. Crash pad assembly2. Crash pad lower panel3. Crash pad side cover [LH]4. Crash pad side cover [RH]
Other information:
Hyundai Elantra (CN7) 2021-2026 Service Manual: Intake Actuator
Description and operation DescriptionThe intake actuator is located at the blower unit. It regulates the intake door by a signal from the control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes. Components and components location Components Location1.
Hyundai Elantra (CN7) 2021-2026 Service Manual: Description and operation
Description and operation The System may be limited when • The radar sensor or camera is blocked with a foreign object or debris.• The camera lens is contaminated due to tinted filmed or coated windshield, damaged glass, or stuck of foreign matter (sticker, bug, etc.
Categories
- Manuals Home
- Hyundai Elantra Owners Manual
- Hyundai Elantra Service Manual
- Components and components location
- Drive Mode
- Body (Interior and Exterior)
- New on site
- Most important about car
